en-us
Troubleshooting
50
Dishwasher
does not start.
Power supply fuse may have been
blown or circuit breaker tripped.
Replace blown fuse or reset tripped circuit
breaker.
Door may not be properly latched.
Press the main power switch to turn unit on.
Unit may not be turned on.
Shut door completely.
Delay start may be engaged.
To reset, refer to “Delay start” section in this
manual.
Child lock is activated.
Deactivate the child lock. Refer to “Child
Lock” section in this manual if applicable.
The door may have been closed
without first selecting a cycle.
Select a cycle and close the door.
Power cord not inserted.
Ensure that the power cord is plugged all
the way into the back of the dishwasher and
into the socket. Check that the socket
functions.
The water supply may not be
connected.
Check and turn on water supply.
The dishwasher door has not been
shut properly.
Close the door.
The door has been open for more
than 4 seconds after pressing the
START button.
Press the START button again and close the
dishwasher door within 4 seconds (see
“Protection against unintentional
operation”).
Wash cycle
starts
automatically.
You did not wait until wash cycle
ended.
Perform reset.
(see “Canceling the wash cycle“).
Fault
Cause
Remedial action
