Troubleshooting
en-us
43
3
Troubleshooting
Troublesh
ooting
Dishwashers may occasionally
exhibit problems that are unrelated to
a malfunction of the dishwasher itself.
The following information may help
you with a dishwasher problem
without involving a repair
professional.
Fault
Cause
Remedial action
Error code
§
:
³µ
is lit.
Supply hose kinked.
Install supply hose without kinks.
Water supply turned off.
Turn on the water supply.
Water supply jammed or calcified.
Turn on the water supply.
Flow rate must be min. 10 l/min. when
water supply is open.
Filter in the water supply blocked.
Switch off the dishwasher and pull out the
power supply plug. Turn off the tap.
Unscrew water connection.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
dishwasher.
Error code
§
:
¯Å
is lit.
Intake opening (on right inside of
dishwasher) covered by dishes.
Arrange dishes so that the intake opening is
not obstructed.
Error code
§
:
³
is lit.
Heating element calcified or soiled. Clean dishwasher with a dishwasher
cleaning agent or descaler. Operate the
dishwasher with water softening system
and check the setting.
a
"Using special
dishwasher salt" on page 19
Error code
§
:
is lit.
Filters
1b
are soiled or blocked.
Clean filters.
a
"Filters" on page 40
Error code
§
:
is lit.
Waste-water hose kinked or
blocked.
Install hose without kinks, remove any
residue.
Siphon connection still sealed.
Check connection to siphon and open if
required.
Cover on the drain pump loose.
Lock cover correctly.
a
"Drain pump"
on page 42
Error code
§
:
is lit.
Drain pump blocked or cover on the
drain pump is not locked in position.
Clean pump and lock cover correctly.
a
"Drain pump" on page 42
