en-us
Troubleshooting
44
Error code
§
:
Å
is lit.
Supply voltage too low.
Not a dishwasher fault, have the supply
voltage and electrical installation checked.
A different
error code is
indicated on
the digital
display.
(
§
:
¯³
to
§
:
´¯
)
A technical fault has probably
occurred.
Switch off dishwasher with the On/Off
switch
(
. After a short time restart the
dishwasher.
If the problem recurs, turn off the tap and
pull out the power supply plug.
Call customer service and mention the error
code.
Home network
is not loading.
Wi-Fi is not active on the router.
Check the wireless network connection of
your router.
Wi-Fi display
flashes
Connection to the home network is
not available.
Activate the wireless network on your
router.
Home Connect
cannot be
implemented
correctly.
Possible setting errors or a
technical fault.
Observe the supplied documents and
support information for Home Connect.
Refill indicator
for salt
P
and/or
rinse-aid
H
is lit.
No rinse aid.
Refill rinse aid.
No salt.
Refill with dishwasher softener salt.
Sensor does not detect salt tablets. Use different dishwasher softener salt.
Refill indicator
for salt
P
and/or
rinse-aid
H
is not lit.
Refill indicator switched off.
Activation/deactivation
a
"
,
Rinse Aid"
on page 21
,
a
"
+
Water softening
system / special salt" on page 19
There is still enough special
salt/rinse aid available.
Check refill indicator, levels.
Water is left in
the dishwasher
at the end of
the wash cycle.
Filter system or area under the
filters
1b
is blocked.
Clean filters and area underneath.
Wash cycle has not ended yet.
Wait until wash cycle ends or reset.
Fault
Cause
Remedial action
