Bosch SGI2ITS33E, User Manual

Page: 31 / 56

The Ministry in essence NL
the most efficient program in
terms of energy and water
consumption for this type of
crockery and complies with the EU
Ecodesign Regulation.
If you do not operate the device for
10 minutes, the device will switch
off automatically.
3.
impressions.
a The time setting is activated.
Tip: The time setting is deactivated by
pressing repeatedly until "h:00"
appears on the display.
Start program
▶
Press
.
Set program
a The program has ended when
down the display shows
"0h:00m".
You can adjust the wash cycle to the
degree of soiling of the crockery by
setting a suitable programme.
Remarks
s If you want to add crockery
while the appliance is already in
operation, do not use the tablet
container as a handle for the upper
basket. This will allow you to come
into contact with the partially
dissolved tab.
s You can view the current program
change by canceling the program.
→ "Abort program",
Page 32
s To save energy, it is
appliance switches off automatically 1
minute after the end of the programme.
If you open the door immediately after
the program has ended, the appliance
will switch off after 4 seconds.
▶
Just as often on the program
button until the desired
program is set.
→ "Programs", Page 17
a The program is set and the
LED flashes.
a The remaining program run time
appears on the display.
Set additional function
In addition to the selected washing
program you can set additional
functions.
Remark: The available additional
functions depend on the selected
program.
→ "Programs", Page 17
▶
Press the button of the desired extra
press function.
→
"Additional Features", Page 18
Activate key lock
The key lock prevents the device
from being operated accidentally or
improperly while it is in operation.
a The additional function is set and the
button of the additional function flashes.
Make time setting
▶
Approx. 3 seconds on
to press.
You can delay the start of the program
for up to 24 hours.
a The key lock is activated
and is automatically deactivated
at the end of the program
1.
impressions.
a The display shows "h:01".
spring.
a When the device is operated,
2.
With the desired programs
set tart.
flashes on the display.
31