Bosch SGI2ITS33E User Manual Download

Page: 8 / 56

NL Safety

▶

Never bring the power cable into contact with sharp

points or edges.

▶

Never kink, pinch or alter the power cord.

Damaged device

WARNING ‒ Risk of electric shock!

s A damaged appliance or power cord is dangerous.

▶

Never use a damaged device.

▶

Never use a device with a cracked or broken surface.

▶

Never pull on the power cord to disconnect the device

from the power supply. Always pull the plug on the power

cord.

▶

If the appliance or the mains cable is damaged, immediately

unplug the mains cable from the socket or switch off the

fuse in the fuse box and close the tap.

Contact customer service."

→

Page 53

s Improper repairs are dangerous.

▶

Only qualified personnel may carry out repairs on the

device.

▶

Only original spare parts may be used to repair the device.

▶

If the power cord of this appliance is damaged, it must be

replaced with a special cord available from the

manufacturer or its service agent.

Dangers for children

WARNING ‒ Risk of suffocation!

s Children can pull packing material over their head and become

entangled and suffocate.

▶

Keep packaging material away from children.

▶

Do not let children play with packaging material.

Summary of Contents for SGI2ITS33E

























































Search results

Summary of Contents for SGI2ITS33E

Reviews:

Related manuals for SGI2ITS33E

Brands by name

Popular brands

Bosch SGI2ITS33E, User Manual

Search results

Summary of Contents for SGI2ITS33E

Reviews:

Related manuals for SGI2ITS33E

Brands by name

Popular brands