96
en | Configuring equipment using Utility tool
Security Escort
2018.03 | SE3v1.0 | DOC
Technical Reference Manual
Robert Bosch (SEA) Pte Ltd
the firmware that is uploaded at the start, the SE transmitter row will be grayed out and
disabled.
9.
Repeat steps 8 for other SE transmitters if required.
10. To start upgrading the SE transmitter firmware, click the
[Start]
button. An indicator bar
appears on screen to display the progress of the firmware upgrade. The beeping tone
changes to continuous single beep tones. The red and green LED of the SE coordinator
will be turned on for the entire duration of upload. To abort the upgrade, click the
[Cancel]
button.
11. Upon completion of the firmware upgrade, the SE transmitter emits a rapid succession of
beeping tones for 1 second, indicating that the firmware upgrade is successful. A
confirmation dialog message appears. The red and green LED of the SE coordinator will
be turned off once upload has completed. Click the
[OK]
button to close the dialog
message, and the indicator bar will disappear.
12. Perform the transmitter test again within sight of the SE coordinator. Confirm that the
firmware version is correctly upgraded.
Summary of Contents for SE3000 Series
Page 1: ...Security Escort SE3000 Series en Technical Reference Manual ...
Page 2: ......
Page 255: ......