Fig.9-13:
Dialog for handwheel settings
The handwheel provides a 16-bit value, which can be used freely in the cus‐
tomer application (e.g.: 0-65535, +/-32767, ...).
The dialog box displays a value from 0 to 65535. When switching on the device
the value of the handwheel is set to 0. If the "Reset" button is actuated, the
value of the handwheel is reset to 0.
Restart Options (Start-up)
The "Startup" tab is contained in the "Config Tool", see
figuration Tool (Config Tool)" on page 100
Fig.9-14:
Dialog for restart
The setting option on the "Startup" tab are in preparation and therefore they are
currently without function.
System Update
The "Sysstem Image" tab is contained in the "Config Tool", see
" Configuration Tool (Config Tool)" on page 100
Bosch Rexroth AG
DOK-SUPPL*-VCH*08.1***-PR02-EN-P
Rexroth IndraControl VCH 08.1 Hand-held Terminal
102/117
Software
