EMC Manual ServodynT, D
Safety instructions
13
1070 066 074-101
1.4
Proper use
Drive inverters are components to be installed in metal machines and sys
tems for industrial use.
With the appropriate adjustments and extensions they can also be used
for commercial use.
-
Before putting the drive inverters into operation, ensure that the ma
chine which the inverters are to be installed in meets the stipulations
of the machine guideline (89/392/EEC) and the EMV guideline
(89/336/EEC).
-
The inverters themselves meet the protection standard goals of the
undervoltage guideline (73/23/EEC) and the coordinated norms
prEN 50178 (VDE 0160) and EN 6014611 (VDE 055811).
These products pose no danger to persons or property if they are used
in accordance with the handling stipulations and safety notes prescribed
for their configuration, mounting, and proper operation.
! DANGER !
The safe and reliable operation of this product requires its proper transport,
storage, setup and assembly as well as conscientious operation and use.
Ensure that no components are bent and no insulation distances are
changed at the inverters. Do not touch any electronic components and
contacts.
CAUTION !
Drive inverters contain electrostactically sensitive components
which can easily destroyed if handled improperly.
! DANGER !
Do not allow the housings of electrical components to be destroyed, as this could
cause personal injury.
!
1.2
1.3
!
1.4
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
