3−34
Electric Drives
and Controls
Bosch Rexroth AG
RhoMotion
1070072367 / 04
Structure of the rho4.0
3.3.5
Example of a B~IO M-IBS bus connection
No configuration of the PCI-BM-IBS is necessary for the connection of
Interbus-S since the bus master configures itself on its own. The bus ma-
ster allocates addresses to the modules with increasing addresses from
address 0. If a gateway is connected, the gateway uses the byte address
0 to 19.
3.3.6
Example of a B~IO M-CAN bus connection
The windows tool WinCAN is used for the PCL resp. the bus master
PCI_BM_CAN to configure the I/O gateway with CAN. To use the I/O ga-
teway there for transfer, one sets for the setting 20 bytes (switch at I/O
gateway) 3 input and output blocks.
The following picture shows the setting:
Summary of Contents for Rexroth Rho 4.0
Page 12: ...XII Electric Drives and Controls Bosch Rexroth AG RhoMotion 1070072367 04 Contents Notes ...
Page 78: ...4 14 Electric Drives and Controls Bosch Rexroth AG RhoMotion 1070072367 04 PCLrho4 0 Notes ...
Page 168: ...A 4 Electric Drives and Controls Bosch Rexroth AG RhoMotion 1070072367 04 Appendix Notes ...
