8
/64
Axial piston units
|
About this documentation
Bosch Rexroth AG, RE 90300-B/2021-01-19
Table 1: Required and supplementary documentation
Title
Document number
Document type
Environmentally acceptable hydraulic fluids
Describes the requirements for environmentally acceptable
hydraulic fluids on mineral oil basis and related hydrocarbons
for operation with Rexroth hydraulic components, and provides
support for selection of suitable hydraulic fluids for the
hydraulic system.
90221
Data sheet
Fire-resistant, water-free hydraulic fluids (HFDR/HFDU)
Describes the requirements on fire-resistant, water-free hydraulic
fluids (HFDR/HFDU) for operation with Rexroth hydraulic
components and assists you in selecting a hydraulic fluid for your
hydraulic system.
90222
Data sheet
Fire-resistant, water-containing hydraulic fluids
(HFAE, HFAS, HFB, HFC)
Describes the requirements on fire-resistant, water-containing
hydraulic fluids (HFAE, HFAS, HFB, HFC) for operation with
Rexroth hydraulic components and assists you in selecting
a hydraulic fluid for your hydraulic system.
90223
Data sheet
Axial piston units for operation with fire-resistant hydraulic
fluids – water-free, water-containing
(HFDR, HFDU, HFA, HFB, HFC)
Describes the requirements on fire-resistant, water-free and
water-containing hydraulic fluids (HFDR, HFDU, HFA, HFB, HFC)
and contains the technical data for operation with Rexroth
hydraulic components.
90225
Data sheet
Bosch Rexroth Fluid Rating List for Rexroth hydraulic
components (pumps and motors)
Contains the hydraulic fluids positively evaluated by
Bosch Rexroth.
90245
Data sheet
Information on the application of hydrostatic drives at low
temperatures
Contains additional information on the application of Rexroth axial
piston units at low temperatures.
90300-03-B
Manual
Storage and preservation of axial piston units
Contains additional information on storage and preservation.
90312
Data sheet
BODAS-drive eDA application software
BODAS-drive eDA is a software solution integrated in the Rexroth
SRC-eDA1/31 control unit for controlling the hydrostatic drive
train in wheeled vehicles.
95316
Data sheet
1.3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarification,
they are explained in the sections below.
1.3.1 Safety instructions
This documentation contains safety instructions in chapter 2.6 "Product-specific
safety instructions" on page 14 and in chapter 3 "General instructions on property
damage and product damage" on page 19, as well as before a sequence of actions
or an instruction for action involving a risk of personal injury and property damage.
Always follow the measures for danger prevention associated with the use of this
product.
