RE 90300-B/2021-01-19, Bosch Rexroth AG
About this documentation |
Axial piston units
7
/64
1 About this documentation
1.1 Validity of the documentation
This documentation is valid for the following products:
Axial piston units from Bosch Rexroth, which include:
• Axial piston pumps
• Axial piston motors
This documentation is intended for machine/system manufacturers, assemblers and
service engineers.
This documentation contains important information on the safe and proper
transport, installation, commissioning, operation, maintenance, removal and simple
troubleshooting of the axial piston units.
▶ Read this documentation completely, in particular chapter 2 "Safety instructions"
on page 11 and chapter 3 "General instructions on property damage and
product damage" on page 19 before you start work with the axial piston unit.
1.2 Required and supplementary documentation
▶ Only commission the axial piston unit if the documentation marked with the book
symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title
Document number
Document type
Order confirmation
Contains the order-related technical data for your axial piston unit.
–
Order confirmation
Installation drawing
Contains the outer dimensions, all ports and the hydraulic circuit
diagram for your axial piston unit.
Please request the installation
drawing from your contact at
Bosch Rexroth.
Installation drawing
Product-specific instruction manual
Contains special information for the axial piston unit concerned.
The product-specific instruction
manual can be found in the internet,
see chapter 16 "Product-specific
instruction manuals" on page 60.
Instruction manual
Product-specific data sheet
Contains the permissible technical data, ports, main dimensions
and circuit diagrams of standard versions.
The product-specific data sheet
can be found in the internet,
see chapter 15 "Technical data"
on page 59.
Data sheet
Overall circuit diagram of the machine or system
The hydraulic and electrical circuit diagrams of the
machine/system contain the information of the hydraulic or
electrical ports. You will need these data to work with the axial
piston unit as part of the machine/system.
You will receive the documents from
your machine/system manufacturer
on request.
Circuit diagram
Hydraulic fluids based on mineral oils and related hydrocarbons
Describes the requirements for hydraulic fluids on mineral oil
basis and related hydrocarbons for operation with Rexroth
hydraulic components and provides support for selection of
suitable hydraulic fluids for the hydraulic system.
90220
Data sheet
