Bosch Rexroth MAD100, Operating Instructions Manual

Page: 39 / 72

● Brake connections 1-2 are only assigned if the motor is man‐
ufactured with the optional brake.
● Only one contact pair of PTC thermistor connections 3-4 and
5-6 is connected to the motor cable.
● The seal which is glued into the lid at the factory may not de‐
tached or damaged.
● Note the size of the cable gland and connection thread for
the cable inlet into the terminal box.
● In particular, make sure that the connection cables are cor‐
rectly installed in the terminal box, without tension to avoid
abrasion or pressure marks on the cables.
● The connections of the internal motor windings in the termi‐
nal box must not be loosened.
Terminal box details
① Cover
② Seal
③ Terminal block U-V-W
④ PE connection
⑤ O-ring
⑥ Adapter plate mounting screws
⑦ Schutzabdeckung des Cable gland connection thread
⑧ Adapter plate for cable gland
⑨ Terminal strip (brake, temperature sensor)
⑩ Purge gas connection (Option)
⑪ Clamping screws for setting the outgoing cable direction (4
pcs.)
Fig. 6-5: Terminal box details
MAD / MAF Asynchronous Housing Motors 25/57
Assembly
R911336186_Edition 02 Bosch Rexroth AG