RE 64025-B/2021-08-12, Bosch Rexroth AG
About this documentation |
Control blocks for mobile applications
5
/54
1 About this documentation
1�1 Validity of the documentation
This documentation is valid for the following products:
• M1
• M4
• M6
• M7
• M8
• M9
• MO
• RCS
• ROM8
• RS
• SM
• SP
• SX
This documentation applies to all control blocks of the named series, regardless of
their manufacturing date up to a new revision of this document.
This documentation is intended for machine manufacturers.
This documentation contains important information on safe and proper transport,
installation and disassembly, commissioning, operation, maintenance and servicing
of the product.
▶ Read this documentation completely and in particular the chapters entitled 2
"Safety instructions" page 9 and 3 "General instructions on property
damage and product damage" on page 15 before you start work with the
control block.
1�2 Required and supplementary documentation
▶ Only commission the product if the documentation marked with the
book symbol
is available, understood and complied with.
Table 1: Required and supplementary documentation
Title
Document number
Document type
Technical data sheet
Contains the permissible technical data.
Please bear in mind that different technical data sheets apply
depending on the series:
Data sheet
Open-center control block MO-16, 22, 32
64354
Open-center control block MO-40
64370
Open-center control block MO-52
64373
Open-center control block M1
64263
Open-center control block M8
64294
Open-center control block M9
64303
Open-center control block ROM8
66162
Open-center control block SM
64122
Closed-center control block RCS30
64155
Closed-center control block RCS35
64157
Load-sensing control block M4-12
64276
Load-sensing control block M4-15
64283
Load-sensing control block M4-22
64279
Load-sensing control block SP-08
64139
