Standard
Title
Edition
DIN EN
61000-6-4
(VDE 0839-6-4)
Electromagnetic compatibility (EMC)
Volume: 6-4: Generic standards – emission stand‐
ard for industrial environments (IEC
61000-6-4:2006)
September
2007
DIN EN
61000-6-2
(VDE 0839-6-2)
Electromagnetic compatibility (EMC)
Volume: 6-2: Generic standards – noise immunity
for industrial environments (IEC 61000-6-2:2005)
March 2006
Fig.4-11:
Electromagnetic compatibility (EMC) standards
4.9.2
Note for the Machine Manufacturer
The electronic products described in this project planning manual do not fall
under the machinery listed in the EC machinery directive. Therefore, explana‐
tions are not required for the 89/392/EMC Directive and do not exist.
89/392/EMC, the EU Directive for machines, specifies the requirements for a
machine. In this Directive, a machine is defined as a combination of the com‐
ponents or mechanisms combined with each other. The described products
belong to the electrical equipment of a machine. Therefore, they are to be in‐
cluded in the declaration of conformity of the machine manufacturer.
The standard EN 60204-1 (safety of machinery, general requirements on the
electrical equipment of the machines) can be used for the electrical equipment
of the machines.
Loss of CE conformity due to modifications on
the device.
NOTICE
The CE marking is only valid for the device in its delivery status. After modifying
the device, the CE conformity has to be verified.
4.10
UL/CSA Certified
The devices of the IndraControl VEP **.4 product family are certificated ac‐
cording to
●
UL508 (Industrial Control Equipment) and
●
C22.2 no. 142-M1987 (CSA)
UL file no. E210730
However, there can be combinations or stages of expansions with limited or
missing certification. Therefore verify the certification by using the UL label on
the device.
Loss of UL/CSA conformity due to modifica‐
tions of the device.
NOTICE
The UL- and CSA- marking is only valid for the device in its delivery status. After
modifying the device, the UL/CSA conformity is to be verified.
Bosch Rexroth AG
DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal
32/139
Technical Data
