RE 63124-B, Edition: 08.2021, Bosch Rexroth AG
Maintenance and repair |
Press modules Type IH04 37/56
10.5 Repair
The press module may only be repaired by specialist personnel according
to chapter 2.4 "Qualification of personnel".
Bosch Rexroth has an extensive service offer regarding the repair of valves.
Part tested and pre-assembled original Rexroth assemblies allow for successful
repair works requiring only little time.
If you have any questions regarding spare parts and repair, please contact your
local Bosch Rexroth service or the service department of the press module
manufacturer’s factory:
Bosch Rexroth AG
Service
Bgm.-Dr.-Nebel-Str. 8
97816 Lohr am Main
Phone: +49 (0) 9352 - 40 - 50 60
[email protected]
For the addresses of our sales and service network, please refer to
10.6 Spare parts
NOTICE
Malfunction of the press module/machine due to the use of incorrect
spare parts!
Damage to property!
▶ Only use components listed in the product-specific documentation (parts list).
▶ Only use new seals with the required media compatability.
▶ As the sealing material may differ despite being of identical appearance, the
material number should be checked.
In case of questions, please contact Bosch Rexroth or your local Rexroth
distribution organization in any case.
For the addresses, please refer to
.
▶ Order spare parts in writing. In urgent cases you can also order by phone,
but you are kindly requested to confirm your order in writing.
▶ Please provide the following information when ordering spare parts:
– Material number and order number of the press module (name plate)
– Material number of the respective component
– Required quantity
– The desired type of dispatch (e.g. as parcel, freight, air freight,
by courier service, etc.)
Ordering spare parts
