10/56
Press modules Type IH04
| Safety instructions
Bosch Rexroth AG, Edition 08.2021, RE 63124-B
2.4 Qualification of personnel
The activities described in this documentation require basic knowledge of
mechanics and hydraulics as well as knowledge of the appropriate technical terms.
In order to ensure safe use, these activities may only be carried out by an expert
in the respective field or an instructed person under the direction and supervision
of an expert.
Experts are those who can recognize potential dangers and apply the appropriate
safety measures due to their professional training, knowledge and experience,
as well as their understanding of the relevant conditions pertaining to the work
to be undertaken. An expert must observe the relevant specific professional rules
and have the necessary hydraulic expert knowledge.
Hydraulic expert knowledge means, among other things:
• Reading and completely understanding hydraulic circuit drawings,
• in particular, completely understanding the relationships regarding the safety
equipment and
• having knowledge of the function and set-up of hydraulic components.
Bosch Rexroth offers training in specific fields.
An overview over the training contents can be found online at:
www.boschrexroth.com/de/de/academy/
.
2.5 General safety instructions
• Observe the valid regulations on accident prevention and environmental protection.
• Observe the safety regulations and provisions of the country in which the product
is used/applied.
• Only use Rexroth products in technically perfect condition.
• Observe all notes on the product.
• Persons who assemble, operate, disassemble or maintain Rexroth products
must not be under the influence of alcohol, drugs or pharmaceuticals that
may affect their ability to react.
• Only use accessories and spare parts approved by the manufacturer in order
to exclude any hazard to persons due to unsuitable accessories and spare parts.
• Comply with the technical data and environmental conditions specified in the
product documentation.
• The installation or use of inappropriate products in safety-relevant applications
could result in unintended operating states in the application, which in turn could
cause personal injuries and/or damage to property. Therefore, only use a product
for safety-relevant applications if this use is expressly specified and permitted
in the documentation of the product, see chapter 4 "Scope of delivery", or if the
safe suitability of the product in the application is confirmed by a separate
conformity procedure for the end product, e.g. in explosion-protected areas or
in safety-related parts of control systems (functional safety).
