20/56
Press modules Type IH04
| Transport and storage
Bosch Rexroth AG, Edition 08.2021, RE 63124-B
6 Transport and storage
▶ During transport and storage, always comply with the required environmental
conditions specified in the technical data of the data sheet.
▶ Observe the transport instructions on the packaging.
The press module is delivered secured on a pallet.
For notes on unpacking, refer to chapter 7.1 "Unpacking".
6.1 Transporting the press module
WARNING
Falling over, falling down, or uncontrolled position change of the unsecured
press module!
Danger to life! Risk of injury! Danger of crushing! Damage to property!
▶ Wear your personal protective equipment.
▶ Use original packaging for transport (crate with plate fixation), if possible.
▶ Use the intended two attachment points when lifting (without packaging),
▶ Check the weight with packaging from the delivery note and without packaging
from the assembly drawing.
▶ Determine the position of the center of gravity and ensure a stable loading
position until the place of installation is reached.
▶ Carefully position the press module on the contact surface to prevent
any damage.
▶ Before transport, close all openings using the supplied protective caps/covers
in order to prevent dirt or humidity from penetrating the press module,
and leaking of any oil residues due to oil-wetted surfaces within the press module.
Closing of openings
