Bosch rexroth HMS01, Instruction Manual

Page: 30 / 56

Signal Words of the Safety Instructions
The signal words of the safety instructions in this documen-
tation have the following significances:
WARNING
In case of non-compliance with a safety instruction contain-
ing the signal word "WARNING", death or serious injury
could occur.
CAUTION
In case of non-compliance with a safety instruction contain-
ing the signal word "CAUTION", minor or moderate injury
could occur.
General Safety Instructions and Directions for Use
WARNING
Danger to life in case of non-compliance with the below-
mentioned safety instructions!
Serious personal injury in the case of improper conduct!
▶ Do not attempt to put the drive components into opera-
tion until you have read and observed the safety instruc-
tions.
▶ Only qualified staff or competent persons are allowed to
mount, electrically connect and commission the drive
components. A competent person knows the relevant
standards and regulations. A competent person must be
able to judge the delegated work and identify potential
hazards.
▶ Observe all instructions to be found on the drive compo-
nents and in the Operating Instructions, as well as the
standards and regulations applicable to your drive sys-
tem.
The drive components can cause hazards.
Protect yourself from the following hazards:
▶ Improper transport and mounting
▶ Magnetic and electromagnetic fields
▶ Electrical voltage
▶ High temperatures of the drive components
▶ Improper handling of batteries
If you do not understand an instruction in this documenta-
tion or in the Operating Instructions, or if you have any
questions, please contact the Rexroth service, before you
start working (tel.: +49 9352 405060, e‑mail:
service.svc@boschrexroth.de or
www.boschrexroth.com/electrics ).
Appropriate Use
Drive components made by Rexroth are designed to control
electrical motors and monitor their operation.
It is the prerequisite for the intended use and the safe han-
dling of the drive components that you proceed appropri-
ately and correctly in the case of the following activities:
▶ Transport
▶ Storage
▶ Mounting
▶ Installation (electrical connection system)
▶ Commissioning
▶ Operation
▶ Dismounting
▶ Disposal
The drive components are exclusively designed for commer-
cial and industrial use. Only operate the drive components
under the specified conditions (see index entries "Data",
"Dimensions", "Instructions for use" and "EMC" in the Ope-
rating Instructions). Using drive components in potentially
explosive areas is forbidden.
Transport and Storage
WARNING
Risk of injury during transport by improper handling!
▶ Only use suitable and sufficiently sized lifting gear and
means of transport.
▶ Secure eyebolts before using them and check them for
tight fit.
▶ Never be under hanging loads.
▶ Use suitable personal protective equipment (e.g. safety
shoes).
Store the drive components in their original packages, in a
dry, dust-free, vibration-free place, and protect them from
light and direct solar radiation.
2 Drive Components
Bosch Rexroth AG, Edition 02, R911339259, DOK-DRIVE*-SAFETY*****-SA02-EN-P