Bosch Rexroth GTE Series Project Planning Manual Download Page 65

Page: 65 / 88

Motor or gearbox damage and guarantee loss

due to incorrect storage!

NOTICE

The following conditions must be kept during storage:
●

Permissible range of temperature: -20°C to +80°C (only valid for short-

term storage or transport. For a long-term storage please keep a temper‐

ature range of 0°C to +30°C.)

●

Store motors in dry places which are free from dust and vibrations.

●

Store motors horizontally.

●

Do not remove the plastic protective sleeve on the output shaft. It protects

the shaft from moisture,rust and mechanical damage.

DOK-GEAR**-GTE********-PR06-EN-P
Rexroth GTE Planetary Gearboxes

Bosch Rexroth AG

63/85

Handling, Transport and Storage

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth GTE Series

























































































Search results

Summary of Contents for Rexroth GTE Series

Reviews:

Related manuals for Rexroth GTE Series

Brands by name

Popular brands

Bosch Rexroth GTE Series, Project Planning Manual

Search results

Summary of Contents for Rexroth GTE Series

Reviews:

Related manuals for Rexroth GTE Series

Brands by name

Popular brands