Bosch Rexroth GTE Series Project Planning Manual Download Page 25

Page: 25 / 88

●

The thermal use-limit of the motor-gearbox combination must be adhered.

●

The cycles of the operation modes S4 and S5 should not exceed 1,000

cycles per hour. If higher cycle rates are necessary, the GTM gearbox

must be derated accordingly (see Fig. 5-3).

It must be ensured that
●

the maximum motor torque is smaller than the maximum gear‐

box – input torque.

●

the maximum motor speed is smaller than the maximum per‐

missible gearbox-input speed.

DOK-GEAR**-GTE********-PR06-EN-P
Rexroth GTE Planetary Gearboxes

Bosch Rexroth AG

23/85

Dimensioning and Selection

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth GTE Series

























































































Search results

Summary of Contents for Rexroth GTE Series

Reviews:

Related manuals for Rexroth GTE Series

Brands by name

Popular brands

Bosch Rexroth GTE Series, Project Planning Manual

Search results

Summary of Contents for Rexroth GTE Series

Reviews:

Related manuals for Rexroth GTE Series

Brands by name

Popular brands