5. Press the "Home" key to confirm the selection.
6. Press the "i" key to toggle to "Exit".
7. Press the "Home" key for confirmation purposes.
If the touch function is disabled via "Always Off" or "Off for 60 sec",
the status LED flashes green on the front while it is disabled.
12.2 Operating and error display
A status LED is positioned in the lower area of the front plate.
Symbol, LED Display
Description
Action
Power
LED green
Normal mode
-
LED off
No supply voltage of 24 V DC
Check the supply voltage
LED orange
●
No screen signal present
●
Connected control cabinet PC
is booting
●
Check video connection
●
Wait until the system completed
booting
Tab. 12-1: Status LED for operating and error display on the front panel
13 Error causes and troubleshooting
For information on the error display on the front panel, refer to
"Operating and error display " on page 37
Error
Correction
No image visible
●
Connect the supply voltage and check the X1S1 connec-
tion
●
Connect the display port or CDI+ cables correctly
●
If panels with display port are used, use only Bosch
Rexroth display cables to connect the panels, refer to
chapter 5.5 "Connecting cables of the display port" on
.
Distorted display due to incorrect dis-
play resolution
●
Set the correct display resolution in the graphic driver.
The standard resolution of the Windows images (also for
the recovery sticks) is FullHD (1920 × 1080). Set the
correct value once when displays with a smaller resolu-
tion are used
●
Restart the control cabinet PC
"NO SIGNAL" on the display
●
Check the cabling of the graphic interface.
●
Check the selected video interface and correct the setting
in "On Screen" menu if required. Setting upon delivery:
"RX" (for XCDI+rx).
Tab. 13-1: Error causes and troubleshooting
ctrlX HMI DE0015, DE0021 Multi-Touch
Displays (Housing Devices)
37/45
Error causes and troubleshooting
R911405731_Edition 02 Bosch Rexroth AG
