Fig. 10-15: Removing the housing cover
10.3 Installation notes
●
When mounting the display, ensure an ergonomic operation. Additionally, en-
sure that all moving machine components can be seen by the operator at any
time
●
Avoid installation positions exposed to direct UV and sunlight. Direct sunlight
reduces the readability at the screen and causes additional warming
●
The LED display on the operator panel must not be covered.
●
Wire all cables in loops. Use strain reliefs for all cables
●
To maintain the degree of protection IP 65, use only a cable bushing of the
sealing gasket fitting to the cable cross sections. If required, use the fitting
sealing gasket
●
Do not lay the CDI cables in parallel to motor cables or to other noise sour-
ces, as the CDI connection can be disturbed. Keep the maximum distance
possible from interference sources
ctrlX HMI DE0015, DE0021 Multi-Touch
Displays (Housing Devices)
29/45
Mounting and electrical installation
R911405731_Edition 02 Bosch Rexroth AG
