ENGLISH
•
Remove the dead battery. Under no
circumstances should conductive tools
(e.g.tweezers) be used to remove batteries
g.danger of short circuit. Remove the battery
from the holder by hand.
•
Insert the new battery. Positive pole at the top.
Press the battery into the holder until it
engages.
•
Assemble the display unit. The tightening
torque for the bolts is 1.4 + 1 Nm.
•
Set the date and time via the operating
program.
Please observe the battery disposal
instructions in chapter
Maintenance and repair
Fig. 30:
Exchanging the battery
Tab.1
9
: Battery: Recommended types
Compo-
nent
Name
Manu-
factu-
rer/
Supplier
Type Remark
Lithium
cell 3 V
BT1
SONY
CR
2450
Lithium
battery
3 V,
Q ≥
560 mAh
24.5x5 mm
VARTA
CR
2450
CS351_zweispaltig - D.book Seite 97 Donnerstag, 2. Oktober 2014 8:36 08
CS351/CC-CS351
| 3 609 929 B45/2019-12
Bosch Rexroth AG 83
/
96
Cleaning and care
Cover all openings with the appropriate protective
caps/equipment.
Check that all seals and plugs for the plug
connections are firmly fitted so that no humidity
can penetrate the Compact System during
cleaning.
Avoid causing damage when cleaning the
Compact System, especially to the TFT display,
by only wiping it with a damp cloth. Avoid contact
of the display with hard, sharpedged objects.
CAUTION
Any dirt or liquids penetrating the
device lead to malfunctions!
Safe function of the Compact System is no
longer assured.
Always ensure absolute cleanliness when
working on the Compact System.
Do not use a high-pressure cleaner.
CAUTION
Damage to the surface caused by solvents
and aggressive detergents!
Aggressive detergents can damage the seals
on the Compact System and cause them to
age faster.
Never use solvents or aggressive
detergents.
Do not use a high-pressure cleaner for
cleaning.
