Bosch Rexroth BTV 20.4A, Planning Manual

Page: 39 / 138

4.4 Technical Data
4.4.1 General Technical Data
Pentium - Slot CPU (min. 700 MHz) with integrated graphics controller
128 MB (default), 256 MB (as option)
At least 3 GB
1 serial (RS232), 1 parallel (Centronics), 1 x Rexroth RS232, RS422 and
RS485, 1 Ethernet 10Base-T/100Base-Tx, 2 USB (is not supported by Win‐
dowsNT 4.0)
10.4" TFT color display
2 vacant PCI slots on the PC CPU side
Machine operating keyboard, 16 machine function keys
Front panel IP 65 housing IP 20 DIN 40 050, IEC 529
Color RAL 7035 light gray
372 x 335 x 209 mm (WxHxD)
407 x 370 x 220 mm (WxHxD)
115/230 VAC ± 15%; 47-63 Hz
250 VA
100 W
200 W
approx. 10.5 kg (without control cards)
4.4.2 Ambient Conditions
In operation Storage / Transport
Max. surrounding air temperature +5 °C up to +45 °C -20 °C up to +60 °C
Max. temperature gradient 10 K/h 15 K/h
Relative humidity 75 % on average, 80 % occasionally 75 % on average, 80 % occasion‐
ally, non-condensing
Air pressure 860 to 1060 hPa, 1500 m 12,000 m
Max. external magnetic field 6 x 10 -4 Tesla 6 x 10 -4 Tesla
Max. vibration 10-57 Hz: Continuously: 0.0375 mm amplitude, occasionally: 0.075 mm
aplitude, 57-150 Hz, continuously: 0.5 g constant acceleration, occasion‐
ally: 1.0 g constant acceleration. To be applied to each of the three
vertically positioned axes. (according to standard IEC 60068-2-6)
Max. shock Occasionally peaks up to 15 g above 11 ms, half sine wave in each of the
three vertically positioned axes. (according to standard IEC 60068-2-27)
Fig.4-17: Ambient conditions BTV 20.4
4.4.3 Wear Parts
● Fan
● Backlight tubes
● Floppy-disk drive (FDD)
● Hard-disk drives (HDD)
● Battery (slot CPU)
Project Planning Manual | Rexroth MTA 200 Electric Drives
and Controls
| Bosch Rexroth AG 37/135
Machine Operator Terminal BTV 20.4A
PC processor
RAM
Hard disk
Interfaces (PC configuration)
Display unit
Slots
Keyboard
Degree of protection
Front panel surface
Plug-in unit dimensions
Dimensions with front panel
Voltage supply
Max. power consumption
Typ. heat loss
Max. heat loss
Weight
Wear parts without warranty