Fig. 3
Fig. 2
Alingment
arrows
Coarse
Adjustment
Notches
Base
Clamp
Lever
Coarse
Adjustment
Lever
A
B
Assembly and Installation
Fig. 1
10-24x3/4”
Screw
Hole for Hex
Wrench
Mounting
Plate
Quick-release clamp
lever and depth adjust-
ment controls should
face the front of the
router table
they are in the location you find most
convenient. For most people this will be
to the right of the depth adjustment
control when viewed from under the
table. To position the switch and speed
control in this way, align the arrow on
the base with the arrow on the motor
that is below the cord.
1.
Release the base’s quick-release
clamp lever. (Fig. 3)
2.
Line up the arrow on the base with
the desired arrow on the motor.
(Fig. 2)
3.
While pressing the coarse adjust-
ment lever, slide the motor into the
3
2610052946_RA1165 4/9/19 1:42 PM Page 3
