Fig. 3-1: Safety instruction lay-out
3.2 Explaining signal words and safety alert symbols
The safety instructions in this documentation contain specific signal words
(danger, warning, caution, notice) and if necessary, a safety alert symbol
(according to ANSI Z535.6-2011).
The signal word is meant to draw the reader’s attention to the safety instruction
and signifies the degree of danger. The safety alert symbol (a triangle with an
exclamation point), which precedes the signal words "danger", "warning" and
"caution" is used to alert the reader to personal injury hazards.
In case of non-compliance with this safety
instruction, death or serious injury will occur.
DANGER
In case of non-compliance with this safety
instruction, death or serious injury can occur.
WARNING
In case of non-compliance with this safety
instruction, minor or moderate injury could
occur.
CAUTION
In case of non-compliance with this safety
instruction, property damage could occur.
NOTICE
6/27
Using the Safety Instructions
NYCe 4000 Linear motion control sys-
tem
Bosch Rexroth AG R911383228_Edition 04
Summary of Contents for R911383228
Page 28: ...24 27 NYCe 4000 Linear motion control sys tem Bosch Rexroth AG R911383228_Edition 04 ...
Page 29: ...NYCe 4000 Linear motion control sys tem 25 27 R911383228_Edition 04 Bosch Rexroth AG ...
Page 30: ...26 27 NYCe 4000 Linear motion control sys tem Bosch Rexroth AG R911383228_Edition 04 ...
Page 31: ...Notes NYCe 4000 Linear motion control sys tem 27 27 ...
