Power supplies must be switched on/off with the disconnecting device installed
in the cabinet.
The system housing may only be used as build-in equipment in a cabinet, which
means that the end-user must provide a suitable fire and electrical safe
enclosure. The safety of any system incorporating the system housing is the
responsibility of the assembler of the system.
The system housing may only be used in combination with external approved
power supplies. The supply voltage 24V System for the system must be
separated at least by reinforced insulation from all hazardous voltages according
to the standard UL61010-1 third edition.
10.2 Mechanical dimensions
The dimensions of the system housing are the following.
Type code
Width (mm)
Height (mm)
Depth (mm)
NYS04.1-ST-01-LMS-SERCOS-NY4079 200
170
162.4
Tab. 10-1: System housing mechanical dimensions
You can see the dimensions of the system housing in the following views. The
dimensions given in the view exclude free clearance space required for attached
cables, accessories and cooling requirements.
NYCe 4000 Linear motion control sys-
tem
13/27
Installation and Removal
R911383228_Edition 04 Bosch Rexroth AG
Summary of Contents for R911383228
Page 28: ...24 27 NYCe 4000 Linear motion control sys tem Bosch Rexroth AG R911383228_Edition 04 ...
Page 29: ...NYCe 4000 Linear motion control sys tem 25 27 R911383228_Edition 04 Bosch Rexroth AG ...
Page 30: ...26 27 NYCe 4000 Linear motion control sys tem Bosch Rexroth AG R911383228_Edition 04 ...
Page 31: ...Notes NYCe 4000 Linear motion control sys tem 27 27 ...
