background image

en

    Time-setting options

16

O

Time-setting options

Time-sett

ing optio

ns

Your hob has three timer functions:

Programming the cooking time

Kitchen timer

Stopwatch function

Programming the cooking time

The hotplate automatically switches off after the time 

that is set has elapsed.

Setting procedure:

1.

Select the hotplate and the required heat setting.

2.

Touch the 

y

 symbol. The 

‹‹

 symbol and the

V

 

indicator light up in the timer display.

y

 lights up in the display for the hotplate.

3.

Within the next 10 seconds, set the required cooking 

time in the settings range.

4.

Touch the 

y

 symbol to confirm the selected setting.

The cooking time begins to elapse.

Notes

The same cooking time can be set automatically for 

all hotplates. The set time for each of the hotplates 

counts down independently.

You can find information on automatically 

programming the cooking time in section 

~

 "Basic 

settings"

If the flexible cooking zone is selected as the only 

hotplate, the set time for the entire cooking zone is 

the same.

If the Move function is selected for the combined 

hotplate, the set time for the three hotplates is the 

same.

Frying sensor

If a cooking time has been programmed for a hotplate 

and the frying sensor has been activated, the cooking 

time will not begin to count down until the selected 

temperature setting has been reached.

Changing or deleting the time

Select the hotplate and then touch the 

y

 symbol.

Change the cooking time in the settings range or set 

‹‹ 

 to delete the programmed cooking time.

Touch the 

y

 symbol to confirm the selected setting.

When the time has elapsed

The hotplate switches off, the 

 display flashes and 

the hotplate switches to the 

‹‹

 heat setting. An audible 

signal sounds.

‹‹

 and the 

V

 indicator flash in the timer display.

When the 

y

 symbol is touched, the indicators go out 

and the acoustic signal ceases.

Notes

To set a cooking time of under 10 minutes, always 

touch 

0

 before you select the required value.

If a cooking time was programmed for several 

hotplates, the time information for the selected 

hotplate is shown in the timer display.

Select the relevant hotplate to call up the remaining 

cooking time.

You can set a cooking time of up to 

ŠŠ

 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99 

minutes. 
This functions independently from the hotplates and 

from other settings. This function does not automatically 

switch off a hotplate.

Setting procedure

1.

Touch the 

t

 symbol. The 

‹‹

 symbol and the  

V

 

indicator light up in the timer display.

2.

Select the required time on the control panel and 

touch the 

t

 symbol to confirm.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the 

Y

 symbol.

Change the cooking time in the settings range or set 

‹‹ 

 to delete the programmed cooking time.

Touch the 

Y

 symbol to confirm the selected setting.

When the time has elapsed

An audible signal sounds once the time has elapsed. 

‹‹

 and the 

V

 symbol flash in the timer display.

The indicators go out after touching the 

t

 symbol.

Summary of Contents for PXX675DC1E






































Reviews: