Bosch PVS 300 AE, Original Instructions Manual

Page: 19 / 120

English | 19
Bosch Power Tools 1 609 929 M21 | (22/8/07)
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 85 dB(A); Sound
power level 98 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=2,5 m/s
2
, Uncertain-
ty K =1,5 m/s
2
.
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data
”
is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
22.08.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Compact Belt Sander PVS 300 AE
Article number 0 603 327 7..
Rated power input W 300
Output power W 150
No-load belt speed m/min 180 – 250
Sanding belt length mm 303
Sanding belt width mm 40
Weight according to
EPTA-Procedure
01/2003
kg 1,6
Protection class / II
The values given are valid for nominal voltages [U] of 230/240 V.
For lower voltage and models for specific countries, these values
can vary.
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-472-001.book Page 19 Wednesday, August 22, 2007 5:20 PM