background image

NOTE:

 To avoid overflow when using the manual feature, the 

grinder will automatically stop grinding when the maximum 

capacity has been reached.

GRINDING SETTINGS

When selecting your grind setting remember that the higher the 

number the coarser the grind. Use 1-6 for Espresso, 7-12 for 

Auto Drip, and 13-18 for French Press.

CLEANING/MAINTENANCE

INSTRUCTIONS

1. Be sure plug has been removed from outlet. 
2.  Beans can be removed from the hopper by lifting off the lid 

and pouring excess beans out. Hold down the Manual button 

to cleanout any remaining beans.

3.  The bean hopper, bean hopper lid, grind chamber, and grind 

chamber lid can be washed by hand with hot, soapy water or 

placed in the top shelf of a dishwasher. Dry thoroughly.

         a.   Remove the bean hopper by rotating counter-clockwise 

bringing the selector past grind setting 18, align the  

arrows and lift up. Make sure the hopper is empty.

         b.  Remove grind chamber by pulling toward you.
4.   Remove the burr grinder, once the bean hopper has been 

removed, by grasping the metal handle and lifting up. Use 

the brush to remove grinds or wash by hand. Replace the 

burr grinder onto the unit and rotate until the piece is fully 

inserted. Push handle down and replace hopper.

     

 

NOTE:

 The hopper will not attach to the unit if the  

grinder has not been fully inserted.

5. Wipe body of grinder with a damp cloth.  

6.  Any other servicing or maintenance should be performed by an 

authorized service representative.

WarNiNg: NEvEr immErsE uNiT iN WaTEr

WARRANTY

The Cuisinart® Programmable Conical Burr Mill carries a Limited  

3-year Warranty.  This warranty is available to consumers only.   

You are a consumer if you are the owner of a Cuisinart® Programmable Conical 

Burr Mill that was purchased at retail for personal, family, or household use.  

Except as otherwise required by applicable state law, this warranty is not 

available to retailers or other commercial purchasers or owners. We warrant 

that should your Cuisinart® Programmable Conical Burr Mill prove to be 

defective within the warranty period, we will repair it or replace it at our 

option, without charge to you. To obtain warranty service, please register your 

warranty online at 

www.cuisinart.com.au

Summary of Contents for CBM-18A







Reviews: