manualshive.com logo in svg

Bosch PST 6000 Series, Technical Information

Share
Download
Bosch PST 6000 Series Technical Information Download Page 29

Commissioning

4-1

1070 080 058-101 (2001.04) GB

4

Commissioning

DANGEROUS ELECTRICAL VOLTAGE

Danger of life in case of contact with live parts!

Upon commissioning, the thyristor power unit is energized!

CAUTION

Cooling!

Please make sure that there is sufficient cooling capacity.

In the case of water cooled thyristor power units, ensure that the

cooling water inlet connection is turned on and check the water tem-

perature.

Any and all warranty excluded in case of non-compliance.

D

Check the mechanical system of the welding outfit.

D

Check the electrical installation.

D

Check the auxiliary equipment:

D

pneumatic system

D

cooling water or cooling system.

D

Check the operability of the emergency-stop devices.

D

Cutting in the thyristor power unit:

D

Apply mains voltage.

D

The thyristor power unit starts working. The green ”Power” LED on the

front panel of the weld timer (CPU) lights up.

D

Check power supply and 24 V DC supply.

D

Check peripheral I/O signals:

D

sensor signals,

D

communication with other weld timers.

D

Check weld programs (for programmed current values and weld times).

D

Cutting off the thyristor power unit:

D

Verify the safe isolation from supply.

Summary of Contents for PST 6000 Series
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands