Bosch PSI 6XXX.350 L1 Series, Technical Information

Page: 81 / 128

Electrical connection
PSI 6XXX.350 L1
7-40
1070 080 067-101 (2001.03) GB
<Without weld process monitoring>
This signal indicates that welding is performed without current monitoring .
If current monitoring is switched off, deviations from the tolerance band in current moni-
toring are not detected. This may lead to weld quality impairment.
NOTE
When weld process monitoring has been deactivated, you should always check the qual-
ity of your welds.
off on
off
off
on
on
on
off
Current
monitoring
Monitoring stopped
for all timers
Weld process monitoring function
on: without monitoring
on: without monitoring
on: without monitoring
off: with monitoring
Figure 23: Monitoring
NOTE
Monitoring stopped is activated and deactivated for all timers (for all programs of the
selected timer) in the Basic Setup, in the menu Sequence Setup.
Current monitoring is activated and deactivated for specific programs with the Welding
Parameters option in the Current Monitoring window.