中文
|
9
Problem
Possible Cause
Corrective measures
The cut is not smooth
Cutting knife
(1)
or blade
(10)
is blunt
Adjust the distance between the cutting
knife
(1)
and blade
(10)
Cutting knife
(1)
or blade
(10)
is worn
Replace the cutting knife
(1)
or blade
(10)
Maintenance and Service
Maintenance and Cleaning
u
Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage.
There is risk of injury
from unintentionally pressing the on/off switch.
Adjust the distance between the cutting knife and blade
Always remove the battery before adjusting the distance.
After a while, when the distance between the cutting knife
(1)
and the blade
(10)
is no longer optimal, you can re-ad-
just the distance:
– Loosen the screw
(13)
.
– Turn the lock nut
(12)
in the required direction.
– Retighten the screw
(13)
.
Knife lubrication
Remove the battery before refilling with oil.
In order to achieve an optimal cutting performance, pour a
small amount of oil into the oil filler opening
(14)
to lubricate
the cutting knife. The frequency with which you refill the oil
depends the frequency with which you cut, and the diameter
and hardness of the branches.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at:
www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: [email protected]
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The contained lithium-ion batteries are subject to the Dan-
gerous Goods Legislation requirements. The batteries are
suitable for road-transport by the user without further re-
strictions.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Power tools, rechargeable batteries, accessor-
ies and packaging should be sorted for environ-
mental-friendly recycling.
Do not dispose of power tools and batteries/re-
chargeable batteries into household waste!
Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see
"Transport", page 9).
中文
安全规章
电动工具通用安全警告
警告！
阅读随电动工具提供的所有安
全警告、说明、图示和规定。
不遵照以下所列
说明会导致电击、着火和/或严重伤
害。
保存所有警告和说明书以备查阅。
警告中的术语“电动工具”是指市电驱动（有线）
电动工具或电池驱动（无线）电动工具。
工作场地的安全
u
保持工作场地清洁和明亮。
杂乱和黑暗的场地会
引发事故。
Bosch Power Tools
1 609 92A 5R5 | (10.07.2020)
