English |
13
Bosch Power Tools
1 609 92A 2L1 | (5.4.17)
10
Lock-off button for On/Off switch
11
On/Off switch
12
Ball joint
13
Unlocking button for footplate adjustment
14
“PowerLight” lamp (dual LED)
15
Handle (insulated gripping surface)
16
Saw blade holder
*Different saw blades are included in the delivery depending on
the country version.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-11.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
103 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However if the tool is used for different appli-
cations, with different accessories or insertion tools or is poorly
maintained, the vibration emission may differ. This may signifi-
cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Vibration Damper
The integrated vibration damper reduces occurring vibrations.
The soft grip handle increases the safety against slipping off and
thus provides for a better grip and handling of the power tool.
Assembly
Replacing/Inserting the Saw Blade
Before any work on the machine itself, pull the mains
plug.
When mounting the saw blade, wear protective gloves.
Danger of injury when touching the saw blade.
When changing the saw blade, take care that the saw
blade holder is free of material residue, e.g. wood or
metal shavings.
Selecting a Saw Blade
Use only saw blades suitable for the material being worked.
An overview of recommended saw blades can be found at the
beginning of these instructions. Use only ½" universal shank
saw blades. The saw blade should not be longer than required
for the intended cut.
Use a thin saw blade for narrow curve cuts.
Inserting the Saw Blade (see figure A)
Swing the lever for saw blade release
4
approx. 60° in the di-
rection of the arrow and hold it in place. Slide the saw blade
1
into the saw blade holder
16
. Release the lever for saw blade
release
4
again.
Check the tight seating of the saw blade.
A loose saw
blade can fall out and lead to injuries.
For certain work, the saw blade
1
can also be turned through
180° (with the teeth pointed upwards) and re-inserted again.
Removing the Saw Blade (see figure A)
Swing the lever for saw blade release
4
approx. 60° in the di-
rection of the arrow and hold it in place. Pull the saw blade
1
out of the saw blade holder
16
. Release the lever for saw
blade release
4
again.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one’s health. Touching or breathing-in the dust can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Sabre saw
GSA 16-32
Article number
3 601 FA3 0..
Dimensions
– Length
– Width
– Height
mm
mm
mm
501
101
183
Rated power input
W
1600
Power output
W
780
Stroke rate at no load n
0
min
-1
0–2850
Tool holder
SDS
Stroke
mm
32
Cutting depth, max.
– in wood
– in non-alloy steel
– Pipe diameter
mm
mm
mm
230
20
175
Weight according to
EPTA-Procedure 01:2014
kg
4.3
Protection class
/
II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-11:
Cutting board: a
h
=12 m/s
2
, K=2.0 m/s
2
,
Cutting wooden beam: a
h
=18 m/s
2
, K=3.0 m/s
2
.
The values given for sawing particle board apply for a workpiece thick-
ness of 38 mm.
OBJ_BUCH-2842-001.book Page 13 Wednesday, April 5, 2017 5:39 PM
