Bosch Professional GBH 180-LI, Original Instructions Manual

Page: 14 / 217

14 | English
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Button for depth stop adjustment
(6) Release button for impact/mode selector
switch
(7) Impact/mode selector switch
(8) Rotational direction switch
(9) On/Off switch
(10) Handle (insulated gripping surface)
(11) Battery
A)
(12) Worklight
(13) Battery release button
A)
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
A)
(17) Battery charge indicator
A)
(18) Universal holder with SDS plus shank
A)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer GBH 180-LI
Article number 3 611 J11 0..
Rated voltage V= 18
Rated speed
– Clockwise min
-1
0 − 1800
– Anti-clockwise min
-1
0 − 1800
Impact rate
A)
min
-1
0−4550
Impact energy per stroke ac-
cording to EPTA-Procedure
05:2016 J 1.7
Tool holder SDS plus
Max. drilling diameter
– Concrete mm 20
– Steel mm 13
– Wood mm 30
Weight according to EPTA-
Procedure 01:2014
A)
kg 3.1−4.0
Recommended ambient tem-
perature during charging °C 0 to +35
Permitted ambient temperat-
ure during operation
B)
and
during storage
°C -20 to +50
Recommended batteries GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-6 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
93 dB(A); sound power level
104 dB(A). Uncertainty K= 3 dB.
Wear hearing protection
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-6 :
Hammer drilling into concrete: a
h
= 12,5 m/s
2
, K = 1,5 m/s
2
,
Chiselling: a
h
= 11,0 m/s
2
, K = 1,5 m/s
2
,
Drilling into metal: a
h
< 2,5 m/s
2
, K = 1,5 m/s
2
,
Screwdriving: a
h
< 2,5 m/s
2
, K = 1,5 m/s
2
,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
1 609 92A 5B9 | (07.02.2020) Bosch Power Tools