26
| English
22.589 m
24.589 m
23.000 m
min
max
Press the measuring button
(4)
to initiate the measuring process.
Move the measuring tool until the desired distance value is shown in
the display below.
You can pause the continuous measurement by pressing the measur-
ing button
(4)
. The current measured value will be shown at the bot-
tom of the display. The largest and smallest measured value appear
above it. Pressing the measuring button
(4)
once more will start the continuous meas-
urement again.
Continuous measurement automatically switches off after four minutes.
Deleting measured values
In any measuring function, you can delete the most recently recorded individual meas-
ured value by briefly pressing the on/off button
(8)
. Repeatedly pressing the button
briefly will delete the individual measured values in reverse order.
Adding/subtracting values
Measured values or end results can be added or subtracted.
Adding values
The following example describes the addition of areas:
Measure an area as described in the section on area measurement (see "Area measure-
ment", page 25).
2.650 m
5.301 m
14.049 m
2
Press the button
(7)
[
+
]. The calculated area is shown in the centre
of the display.
+84.295 m
98.345 m
2
2
14.049 m
2
Press the measuring button
(4)
to start another
area measurement. Measure the area as de-
scribed in the section on area measurement (see
"Area measurement", page 25). To complete the
addition, press the measuring button
(4)
. To add
more measured values, press the button
(7)
[
+
]
again and repeat.
Subtracting values
To subtract values, press the button
(2)
[
–
]. The subsequent steps are the same as for
the section on adding values.
1 609 92A 7LM | (29.04.2022)
Bosch Power Tools
