English |
19
Bosch Power Tools
1 609 92A 0BR | (14.10.13)
Maintenance
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: [email protected]
Spray material drips from the
nozzle
Build-up of spray material on nozzle
11
and
air cap
2
Clean nozzle and air cap
Nozzle
11
worn
Replace nozzle
Nozzle
11
loose
Tighten union nut
3
No spray material emerges from
the nozzle
Control knob
16
for air-flow control turned
too far to the left
Turn control knob
16
toward the right
No pressure build-up in container
8
Screw container firmly against spray gun
Suction tube
10
loose
Insert suction tube properly
Nozzle
11
clogged
Clean nozzle
Suction tube
10
clogged
Clean suction tube
Ventilation hole on suction tube
10
clogged Clean the suction tube and the ventilation
hole
Spray material too viscous
Thin down the spray material by 10% again
and carry out a test-spray run
Problem
Cause
Corrective Measure
OBJ_BUCH-420-003.book Page 19 Monday, October 14, 2013 2:59 PM
