background image

When using the gas hob, please protect it from 
external air, which may cause uneven heating or even 
extinguish the flame.

When cooking food with vegetable oil and animal fats, 
you should be careful to avoid fires caused by 
overheating oil in the pan.

If fire is caused by overheated oil, immediately use an 
iron pot lid or other large metal object to cover the fire, 
in order to cut off the air needed for burning, and then 
turn off the indoor gas valve. In order to avoid 
accidents, never use water to put out oil or grease fire.

Whenever the burner is extinguished for any reason, 
you should turn it off and wait for at least 1 minute 
before re-igniting the burner.

Normal operation of gas hob should not cause any 
unusual noise. If you have any doubts, please contact 
our local service center.

After use:

Remember to close the gas shut-off valve on the 
indoor pipeline, when you have finished using the gas 
hob.

Using a pan with a thick base can improve heat 
distribution, especially for small flames when the gas 
is on a low setting. The higher efficiency of gas hob is 
achieved when the bigger size of pan is used. This 
can also save energy.

Each time you move the pan away for a short time, 
turn the burner to the small-flame position or off. Even 
when you do other operations near the hob this is a 
good rule of thumb. Turning the flame down will also 
reduce the risk of burning, save gas, and reduce 
pollution.

When you use a big stove, ensure there is a distance 
of at least 25 mm between the stove and the 
surrounding combustible materials. In addition the 
distance between the knob and the stove should be 
at least 50 mm.

4

Key Information

Before first use:

Please clean the hob and its accessories thoroughly. 
This will remove the ‘new’ smell of the hob.

Before using, ensure the gas pipeline, knobs, burner 
heads and caps, and supports have been mounted 
correctly. Then, open the indoor gas valve.

The first ignition (or the ignition after it has been left 
unused for a long time) may be difficult, as there is 
residual air in the gas pipeline, it may be difficult to 
light the burner. This is a normal phenomenon. Please 
repeat the igniting operations, until the hob has ignited 
properly.

When in use:

When cooking with the gas hob, do not leave it 
unattended. Be sure to turn it off completely before 
leaving the room. 

Gas Poisoning Warning!
When using the hob, make sure to open the windows 
or turn on the exhaust fan of the range hood so as to 
keep good ventilation around the gas hob. The gas 
hob may cause carbon monoxide poisoning if you are 
using the gas hob in a closed kitchen with no 
ventilation for an extended time.

Explosion Warning!
If you detect a gas leakage while operating the gas 
hob, you should turn off the indoor main gas valve 
immediately, and then open windows and doors for 
ventilation. Do not use matches or lighters at this time. 
Creating a flame at this time may ignite the residual 
gas in the room and cause an explosion. In the case 
of a leak, please contact your local service center 
immediately.

Fire Warning!
Do not ignite the gas hob for heating when no pan is 
placed on it or there is no food in the pan. This may 
cause the extraction hood over the gas hob to be 
damaged by overheating, or cause a fire if the residual 
grease in the extraction hood is ignited.

Burn risk!
Do not let unattended children use or stand next to the 
gas hob while it is in use. Once the gas hob has been 
turned off, it remains very hot and dangerous for 
several minutes. At this time to avoid burn injury, avoid 
touching the hot burners, supports and the faceplate 
around the burners with your hands or other part of 
your body.

3

Key Information

Operation method

Safety precautions

Summary of Contents for PED7230A Series













Reviews: