Bosch PC2018, Original Instructions Manual

Page: 11 / 194

1 690 706 055 2018-05-03
|
PC2018 | 11 en
2. User information
2.1 Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Beissbarth
". These instructions must be carefully studied prior to
start-up, connection and operation of the PC2018 and
must always be heeded.
2.2 Safety instructions
All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety inst-
ructions for Beissbarth ". These instructions must be care-
fully studied prior to start-up, connection and operation
of the PC2018 and must always be heeded.
2.3 Disposal and scrapping
3. Product description
3.1 Intended use
The PC is intended for use in conjunction with products
from Beissbarth GmbH . Any other or additional appli-
cation, e.g.in conjunction with non-approved products,
does not constitute the intended use. The operator of
the system is liable for any damage resulting from such
usage and not Beissbarth GmbH.
i
As standard, the PC is already installed and connec-
ted in Beissbarth GmbH products on delivery.
3.2 Operating environment
3.2.1 Ambient conditions
¶
The PC is to be protected against water and other
moisture, high temperatures and high humidity.
¶
Never operate the PC in the vicinity of products
which generate high temperatures or electromagne-
tic fields.
¶
Make sure the vent openings in the housing are not
obstructed.
¶
Position the PC on a stable, clean surface and do not
stand anything on the PC connecting cables.
3.2.2 Voltage supply
¶
Make sure the power supply corresponds to the
voltage indicated on the PC.
¶
Make sure the three-wire grounding-type connector
of the power supply unit is connected to a grounding
outlet.
¶
If the PC is connected by way of an extension cable,
make sure the total current level of all the devices
connected to this extension cable does not exceed
the permissible current level for the extension cable
and the fuse in the fuse box.
1. Disconnect the PC2018 from the mains and detach
the power cord.
2. Dismantle the PC2018 and sort out and dispose of
the different materials in accordance with the appli-
cable regulations.
PC2018, accessories and packaging should be
sorted for environmental-friendly recycling.
¶
Do not dispose PC2018 into household
waste.
Only for EC countries:
The PC2018 is subject to the European direc-
tive 2012/19/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
¶
Make use of the local return and collection
systems for disposal.
¶
Proper disposal of PC2018 prevents envi-
ronmental pollution and possible health
hazards.
Only for USA:
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation.
Only for Canada:
CAN ICES-3 (B)/NMB-3(B)