English |
11
Bosch Power Tools
1 609 92A 0PY | (9.7.14)
When operating the vacuum cleaner in damp environ-
ments, use a residual current device (RCD).
Using a re-
sidual current device (RCD) reduces the risk of an electric
shock.
Connect the vacuum cleaner to a properly earthed
mains supply.
The socket outlet and the extension cable
must have an operative protective conductor.
Before each use, check the vacuum cleaner, cable and
plug. Do not use the vacuum cleaner when defects are
detected. Do not open the vacuum cleaner yourself and
have it repaired only by qualified personnel using orig-
inal spare parts.
Damaged vacuum cleaner, cables and
plugs increase the risk of an electric shock.
Do not drive over, crush or stretch the cable. Do not
pull the cable to unplug the plug from the socket outlet
or to move the vacuum cleaner.
Damaged cables in-
crease the risk of an electric shock.
Before maintaining or cleaning the vacuum cleaner,
making any adjustments, changing accessories or plac-
ing the vacuum cleaner aside, remove the plug from the
socket outlet.
This safety measure prevents accidental
starting of the vacuum cleaner.
Provide for good ventilation at the working place.
Have the vacuum cleaner repaired only through quali-
fied specialists and only using original spare parts.
This
ensures that the safety of your vacuum cleaner is main-
tained.
Before restarting, check the proper condition of the
vacuum hose. When doing this, leave the vacuum hose
mounted to the vacuum cleaner to prevent dust from
coming out.
Otherwise, you could possibly inhale dust.
Do not use the vacuum cleaner as a seat.
The vacuum
cleaner could become damaged.
Use the mains cable and the vacuum hose carefully.
Other persons could be harmed.
Do not clean the vacuum cleaner with a water jet point-
ed directly at it.
The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.
Products sold in GB only
: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only
: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols could have a meaning for the use of
your vacuum cleaner. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the vacuum cleaner in a better and safer man-
ner.
Product Description and Specifica-
tions
Intended Use
The vacuum cleaner is intended for vacuuming and extraction
of materials that are not hazardous to one’s health and for
non-flammable liquids. The vacuum cleaner is also suitable
for commercial use.
Use the vacuum cleaner only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the vacuum cleaner on the graphics page.
1
Cable holder
2
Carrying handle
3
Socket for power tool (PAS 12-27 F)
4
Latch of the vacuum cover
5
Container
6
Vacuum hose
7
Release button for hose connection piece
8
Hose connection piece
9
On/Off switch (PAS 11-21/PAS 12-27)
9
Mode selector switch (PAS 12-27 F)
10
Vacuum lid
11
Permanent filter
12
Float
13
Accessory holder
14
Dust bag
15
Plastic basket
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise Information
Sound emission values determined according to
EN 60335-2-69.
Typically the A-weighted sound pressure level of the vacuum
cleaner is 77 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Symbol
Meaning
Read all safety warn-
ings and all instruc-
tions before use the appliance.
Failure to
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury.
CAUTION
OBJ_BUCH-860-007.book Page 11 Wednesday, July 9, 2014 12:46 PM
