Bosch NITP669SUC, Use And Care Manual

Page: 23 / 80

23
--------
To access the basic settings:
The cooktop must be switched off.
1.
Turn on the cooktop.
2. Within10 seconds, touch the
kitchen timer
key for
about 4 seconds.
The first four displays provide product information.
Touch the settings area to view the individual displays.
3.
Touching the kitchen timer key again takes you to the
basic settings.
Œ³ and ¯ light up as a default in the displays.
4.
Touch the kitchen timer key repeatedly until the
desired function is displayed.
5.
Select the desired setting from the settings area.
6. Touch the
kitchen timer
key for at least 4 seconds.
The settings have been saved.
Quit basic settings
Turn the cooktop off with the main switch.
Energy consumption indicator
This function indicates the total amount of energy
consumed by this cooktop the last time it was used for
cooking.
Once switched off, the energy consumption in kWh is
displayed for 10 seconds, e.g.
³
.
¯µ
kWh.
The accuracy of the information displayed depends on
the voltage quality of the power supply, among other
factors.
You can find out how to turn this function on in the
section on
a
"Basic settings"
Power Manager
You can use the power manager to set the total power of
the cooktop.
The cooktop is preset at the factory. Its maximum
performance is specified on the rating label. You can use
the power manager to change the value in accordance
with the requirements for the relevant electrical
installation.
In order not to exceed this set value, the cooktop
automatically distributes the power available between the
cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached,
š
appears in the heat setting
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
cooktop is changed, see section
a
"Basic settings"
Œ³´ Configuring activation of the flexible cooking zone
¯
As two independent cooking zones.*
³ As a single cooking zone.
Œ¯
Restore to standard settings
¯
Individual settings.*
³ Restore factory settings.
*Factory setting
**The cooktop's maximum power output is shown on the rating label.
Product information Display
screen
Customer service index (CSI) ¯³
FD number
¨Ê
FD number 1 ɂ
.
FD number 2
¯ . ‚
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
DXWR
FKHI
SRZHU
PRYH
IOH[
MRLQVSOLW
  
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
KRRG
FRQWURO
KRRG
OLJKW
DXWR
FKHI
  