15
Turning the panel lock off
Touch
Panel Lock
for 4 seconds. The panel lock is now
deactivated.
9
CAUTION
The panel lock may be accidentally turned on and
off due to:
▯
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the
Panel Lock
key.
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you turn off the cooktop.
Turning on and off
See "Basic settings" section.
Wipe Protection
Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
Touch
Panel Lock
. The
>
indicator appears. The control
panel is locked for approximately 35 seconds. You can
now clean the surface of the control panel without risk of
changing the settings.
After the time has elapsed a beep will sound. The Panel
Lock is deactivated.
Note:
The wipe protection does not affect the main
switch. You can turn off the cooktop at any time.
Automatic time limitation
If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.
The element stops heating.
”‰
and the residual heat
indicator
•
/
œ
flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
Basic Settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Display
Function
™‚
Automatic child lock/panel lock
‹
Off*
‚
On
™ƒ
Audible signals
‹
Confirmation and error signals deactivated
‚
Only confirmation signal deactivated
ƒ
All signals activated*
™†
Automatic timer
‹
Off*
‚
-
ŠŠ
Automatic shut-off time
™‡
Length of timer end signal
‚
10 seconds*
ƒ
30 seconds
„
1 minute
™ˆ
Power Management function
‹
= Off*
‚
= 1.000 W. minimum power
‚
.= 1.500 W
ƒ
= 2.000 W
etc.
Š
or
Š
. = maximum power of the element
