manualshive.com logo in svg

Bosch NBN-80052, Installation Manual

Share
Download
Bosch NBN-80052 Installation Manual Download Page 5

Safety

Safety message explanation

!

Caution!
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.

Notice!
Indicates a situation which, if not avoided, could result in
damage to the equipment or environment, or data loss.

Safety precautions

!

Caution!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

!

Caution!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
(NEC 800 CEC Section 60) or applicable local codes.

!

Caution!
Use only a +12 VDC power supply as an auxiliary power source.
The auxiliary power supply unit must be isolated from earth.

 

1

1.1

1.2

 

DINION IP 8000 MP

Safety | en

5

Bosch Security Systems

2014.09 | v1.0 | AM18-Q0665

Summary of Contents for NBN-80052

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands