manualshive.com logo in svg

Bosch NBN-80052, Installation Manual

Share
Download
Bosch NBN-80052 Installation Manual Download Page 31

Camera configuration

The camera normally provides an optimal picture without the
need for further adjustments. However, you can use a web
browser via the network to access a menu to change camera
settings such as user modes, passwords, picture settings and
network settings.
Configuration options using the menu system on the camera
itself are limited to basic setup via the Wizard.

Bosch Video Client

The Bosch Video Client is a free Windows application for
viewing, operating, controlling, and administering surveillance
cameras. It can be downloaded from:
http://downloadstore.boschsecurity.com/
The Configuration Manager, which is part of the Video Client, is
a useful tool for locating the IP addresses of cameras in your
network.
Refer to the Video Client Operator’s Manual for more
information.

 

7.3

7.3.1

DINION IP 8000 MP

Configuration | en

31

Bosch Security Systems

2014.09 | v1.0 | AM18-Q0665

Summary of Contents for NBN-80052

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands