Bosch MUMX25TLCN, Instruction Manual, Page: 20 / 34

20
en Cleaning and servicing
Preparation
Figure
G
:
Warning!
Never assemble the blender without the
seal on the blender holder.
Putting the blender together:
■ Insert blender holder with seal into the
blender jug, ensuring that the line is
under the arrow.
■ Attach blender holder by rotating it as
far as possible to the right.
Working with the blender
Figure
F
:
■ Press the release button and
move multi-function arm to
position 5 .
■ Cover unused drives with drive covers.
■ Remove the blender drive cover.
■ Attach blender jug (mark on the handle
on mark on the base unit) and turn all
the way in an anti-clockwise direction.
■ Add ingredients.
– Maximum amount of liquid ingredients
= 1.75 litres;
– Maximum amount of frothing or hot
liquids = 0.75 litres;
– Optimum processing amount of solid
ingredients = 100 grams.
■ Attach the cover and turn anti-clockwise
all the way into the blender handle. The
cover must be locked in position.
■ Set the rotary switch to the desired
setting.
Adding more ingredients
Figure
F
-8:
■ Switch off the appliance with the rotary
switch.
■ Remove the lid and add ingredients.
or
■ remove the funnel and gradually add
solid ingredients through the refill
opening.
or
■ pour liquid ingredients through the
funnel.
Important information
When processing liquids / liquid ingredients,
slowly increase the speed of the appliance
in stages to prevent the food from shooting
out.
After using the appliance
■ Switch off the appliance with the rotary
switch. Wait until the blade has come to
a standstill.
■ Remove mains plug.
■ Rotate the blender in a clockwise direc-
tion and remove.
■ Take the lid off the blender jug.
■ Rotate the lid in an anti-clockwise direc-
tion and remove.
■ Clean all parts, see “Cleaning and
servicing”.
Tip: It is recommended to clean the blender
immediately after use.
Cleaning and servicing
Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W Risk of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■ Remove mains plug.
■ Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■ Then dry the base unit.
Cleaning the bowl and tools
The bowl and tools are dishwasher-proof.
Do not wedge plastic parts in the dish-
washer, as they could be permanently
deformed during the washing process!