Bosch MTS 6534 User Manual Download Page 5

1 689 989 355

2019-04-08

Bosch Automotive Service Solutions GmbH

Product Description VCI  |  MTS 6534 / MTS 6535  |  5

en

en

WARNING - Risk of accident when used 
while driving

Impairment of driving safety and braking 
effect by connecting cables in the driver's 
area and distraction when using while driv-
ing. Death or serious injury.

 

Place, lay and secure VCI and all connection 
lines in such a way that there is no impair-
ment of driving safety and braking effect.

 

The use of VCI and the recording of 
diagnostic data while driving may only 
be carried out by trained and instructed 
workshop staff.

 

VCI must be operated by a second person 
(not driver) while driving.

 

Observe StVO during the entire data record-
ing.

4.1 

Electromagnetic Compatibility

The VCI satisfies the requirements of the EMC directive 
2014/30/EU The VCI is a class/category A product as 
defined by EN 61 326. The VCI may cause high-frequency 
household interference (radio interference) so that inter-
ference suppression may be necessary. In such cases the 
user may be required to take the appropriate action.

4.2 

Electronic Waste Disposal

This VCI is subject to European guidelines 

2012/19/EU 

(WEEE)

. Old electrical and electronic devices, including 

cables and accessories or batteries must be disposed 
of separately from normal household waste. Please use 
the return and collection systems in place for disposal in 
your area.

Damage to the environment and hazards to personal 
health are prevented by properly disposing of the VCI.

4.3 

FCC Compliance

This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC rules. These limits are designed to 
provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can 
radiate radio frequency energy. If not installed and used 
in accordance with the instruction manual, it may cause 
harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to 
cause harmful interference, in which case the user will 
be required to correct the interference at his or her ex-
pense. All work conducted on electrical devices may be 
performed by persons with sufficient knowledge and 
experience in the field of  electronics.

4.4 

Range of application

The VCI is intended for indoor use only. 

 

R

Do not expose VCI to rain or moisture and prevent 
the formation of condensation. 

 

R

Degree of contamination 2, keep area around VCI 
clean.

5.  Product Description VCI

5.1 

Intended use

 

!

If the VCI and the scope of delivery are operated 
contrary to the way specified by the manufacturer in 
the operating instructions, the protection provided 
by the VCI and the supplied accessories may be 
compromised.

The VCI is a measuring instrument used by professional 
technicians as an aid in diagnosing and repairing auto-
motive electrical and electronic systems. Additionally, 
the software application with VCI can be used to mea-
sure voltage levels, for example. 

5.2 

User group

The product may be used by skilled and instructed per-
sonnel only. Personnel scheduled to be trained, famil-
iarized, instructed or to take part in a general training 
course may only work with the product under the super-
vision of an experienced person.

Summary of Contents for MTS 6534



















Reviews: