Bosch MTS 6534 User Manual Download Page 4

1 689 989 355

2019-04-08

Bosch Automotive Service Solutions GmbH

4  |  MTS 6534 / MTS 6535  |  User Information

en

en

During product warranty period,  
Bosch Automotive Service Solutions GmbH will offer an 
advance exchange service for the VI Hardware ensuring 
minimum impact on Renault-Nissan dealerships. The 
repair centers also offer out of warranty repair services 
and optional warranty extension programs. Replace-
ment parts and repair services are typically provided 
for three more years after the program has ended. 
Please ask directly to your responsible service partner.

Defined warranty period

For the VI Variants 5 years, for following accessories 1 
year:

 

R

USB cable

 

R

DLC cable

 

R

Trigger Switch

 

R

DLC1 Cable Adapter

 

R

Cigarette Lighter Adapter

 

R

WLAN Dongle

 

R

Bluetooth Dongle

 

R

Micro SD-Card

3.  User Information

To increase effectiveness with the VCI, users should 
familiarize themselves with the format and information 
contained in this guide. Every attempt has been made 
to provide complete and accurate technical information 
based on factory service information available at the 
time of publication. However, the right is reserved to 
make changes at any time without notice.

Before starting up, connecting and operating the prod-
ucts it is absolutely essential that the operating instruc-
tions/owner’s manual and, in particular, the safety 
instructions are studied carefully. By doing so you can 
eradicate any uncertainties in handling the products and 
thus associated safety risks upfront; something which 
is in the interests of your own safety and will ultimately 
help avoid damage to the device. When the product is 
handed over to another person, not only the operating 
instructions but also the safety instructions and informa-
tion on its designated use must be handed over to the 
person.

4.  Safety Instructions

Please read and review all instructions, warnings and 
information included in this manual prior to start-up, con-
nection and operation of the VCI (Vehicle Communication 
Interface).

This user manual is written for safe convenient setup and 
use of the product. We recommend that you carefully 
read the manual prior to using the VCI and software.

DANGER – High Electrical Voltage

Certain risk of personal injury or death 

 

Always consult the vehicle's service man-
ual for safety precautions and procedures 
when working with high voltage vehicle 
systems and/or passive restraint devices 
such as airbags, pretensioners and other 
deployable devices.

WARNING – Dangerous Exhaust Gas

Possible risk of personal injury or death 

 

When performing any checks with the 
engine running in an enclosed space such 
as a garage, be sure there is proper ven-
tilation. Never inhale exhaust gases; they 
contain carbon monoxide - a colorless, 
odorless, extremely dangerous gas which 
can cause unconsciousness or death

WARNING – Parking Brake

Possible risk of personal injury

 

To help avoid personal injury, always set 
the parking brake securely and block 
the drive wheels before performing any 
checks or repairs on the vehicle.

CAUTION – Battery Clamps - Polarity

Possible risk of personal injury

 

Do not clasp battery clamps together when 
connected simultaneously to the vehicle's 
12 Volt cigarette lighter or power supply. 
Reverse polarity in the vehicle's cigarette 
lighter may be present. Damage could oc-
cur to the VCI or to the vehicle. Make sure 
all cables and adapters are firmly connect-
ed before starting to use the VCI Always 
read the instructions completely before 
attempting a new procedure. 

WARNING – Parking Brake

Possible risk of personal injury

 

To help avoid personal injury, always set 
the parking brake securely and block 
the drive wheels before performing any 
checks or repairs on the vehicle.

Summary of Contents for MTS 6534



















Reviews: