Bosch MMBPP0 CN Series, Instruction Manual

Page: 14 / 25

14
en Use
Caution!
When the appliance automatically turns off
after51/2minutesofcontinuousoperation
at speed setting 10 , only use speed setting
10
for another 1-2 minutes at the most after
turning the machine back on. Otherwise,
the food may heat up too much and
damage the container.
Notes:
– The status display flashes if the rotary
selector is not at the zero setting when
switched on, if the blender jug has
become detached, or if the electricity
supply has been interrupted. Turn the
rotary selector first to the zero setting
and then continue.
– The rotary selector setting does not
affect the use of the 脉冲 (Pulse)
function.
脉冲 (Pulse) button
For switching to the maximum speed
for a short time. The appliance works at
maximum speed while the 脉冲 (Pulse)
button is pressed.
Blender jug
For processing up to 2 litres of food. The
blender jug is made of Tritan. Tritan is an
unbreakable plastic with no discernable
taste or smell.
Caution!
Do not expose the blender jug to
temperatures above 80°C.
Lid with locking cap
To securely close the blender jug
during processing. To add chopped or
liquid ingredients, turn the locking cap
anticlockwise and remove.
Pusher
To push ingredients that either stick to
the edge or do not blend well towards the
blender knife. To do so, turn the locking cap
anticlockwise, remove and place the pusher
into the opening. X “Using the pusher” see
page 15
Safety systems
The appliance has various safety systems.
X “Safety systems” see page 16
Use
W
Risk of injury!
– Do not insert the mains plug until
all preparations for working with the
appliance are complete and the blender
jug has been correctly positioned on to
the base unit.
– Never put your hand in the blender jug
once it is in place, and always put the lid
on before using the appliance.
Note: The appliance will only work if the
blender jug has been correctly positioned.
X Fig.
B
1. Place the base unit onto a stable and
level work surface. Position the cushion
pad on to the base unit, observing the
recess.
Important: Never attach the blender jug
without the cushion pad.
2. Place the blender jug on to the cushion
pad. Make sure the blender jug is firmly
positioned on the appliance.
3. Put the desired ingredients into the
blender jug.
4. Put the lid with the locking cap in place
and press it firmly.
5. Turn the rotary selector in an
anticlockwise direction as far as it will go
(zero setting).
6. Plug the mains plug into the mains.
Switch on the appliance with the
开/关 (on/off) switch.
7. Slowly turn the rotary switch clockwise
until the desired speed is reached. The
status LED lights up.
8. Process the ingredients until the desired
consistency is achieved.
9. Turn the rotary selector in an
anticlockwise direction as far as it will go
(zero setting). Wait until the appliance
comes to a standstill.