background image

 

 

 

 

Solar Energy 

 

 

 

 

 

 

 

 

Note: 

Solar modules positioned at a low angle accumulate 
dirt more easily. You can find instructions on mainte-
nance-friendly installation in Section 3. 
 

Note: 

The system should not be maintained in direct 
sunlight or under extremely high insolation conditions 
as module surfaces become extremely hot and elec-
trical voltages and currents reach a maximum level! 
 
 
 

7.1

 

Inspection 

 
The following tasks should be carried out during an 
inspection: 
 
 

 

Check solar modules for mechanical dam-
age (cracks, shattered glass). Replace dam-
aged modules immediately, carried out by a 
specialist company.  

 

 

Inspect coupler connections to ensure they 
are firmly in place and free of corrosion. 

 

Secure any cables and couplers which have 
become loose using UV-resistant fastening 
materials. 

 

Check the spacing between solar modules; 
re-position if necessary. 

 

Ensure that the solar module is not in direct 
contact with metal components in the sub-
structure, such as screws and rails. If neces-
sary, re-position solar modules or replace 
the permanently elastic bedding. 

 

Remove any dirt from solar modules; see 
section on cleaning. 

 

Check that fastening components such as 
rails, clamps and anti-slip devices are se-
curely in position and, if required, re-fasten 
securely or replace damaged components 
according to the installation instructions. 

 

7.2

 

Cleaning  

 

 

You should use soft cloths and plenty of wa-
ter for cleaning. 

 

Do not use high-pressure cleaners for clean-
ing. 

 

The temperature of the water should not be 
widely different from the temperature of the 
solar module's surfaces, otherwise you risk 
cracking the glass surface. 

 

Do not use any sharp objects such as glass 
scrapers or metal scourers to clean modules. 
Any damage to glass surfaces due to 
scratches will weaken the glass and cause it 
to break. 

 

Do not use cleaning agents. Do not use 
abrasive, acid or alkaline cleaning agents 
under any circumstances.  

 

Do not step on the solar modules when 
cleaning. Use inspection gangways or suit-
able machinery, such as a cherry picker or 
an elevating work platform. 

14 

 

 

   

 

Summary of Contents for mm-Si plus EU1510 Series
















Reviews: