Bosch MIC Series 500 User Manual Download Page 48

Page: 48 / 56

en | Navigating the Menus

MIC Series 500 Camera

F.01U.173.601 | 2.0 | 2010.11

User’s Manual

Bosch Security Systems, Inc.

rises over 70%. If this is displayed, contact the manufacturer for assistance. Min, max,

and current readings of temperature and humidity are recorded.

–

Statistical Timers

There are a number of timers built in which indicate how long the MIC 500 Series Camera

has been performing various functions. These include time since built, time stationary,

time panning, time tilting, time wiping, and time on tour. These are stored and displayed

in days, hours, minutes, and seconds.

–

Communication Errors

Also included on the on screen menu is a display of the number of communications errors

the MIC 500 Series Camera has detected. Parity, framing, and overrun errors are all

separately counted. These errors may be useful in diagnosing a noisy communications

line.

5.13.1

MIC Information Menus

The MIC 500 Series Camera Information pages are accessible from the main menu and offer

the user a quick way of viewing current settings and measurements. Up and down commands

scroll through the pages available.

5.14

Set User Access Menu

The Set User Access Menu contains the name of each of the Main Menu options where a

simple Yes or No option indicates if shown under normal use. When the menu is exited and re-

opened, the password access is reset and only the items selected are visible to the user. At

the top of the first user access page are 2 options: “Set Full Access” and “Set No Access.”

These allow and disable all features respectively by selecting with a right command.

MAIN MENU

2/2

..USER ACCESS 1/2..

..USER ACCESS 2/2..

SONY SET
CAPTIONS

SET FULL ACCESS

COMMUNICATIONS OFF

PRIVACY

SET NO ACCESS

ADVANCED SETUPS OFF

POT TEST

ALARMS

OFF

MIC INFORMATION

MIC SETUPS

OFF

SONY SET

OFF

SET USER ACCESS

ACTIVATE FEATURE

OFF

CAPTIONS

OFF

HELP

PRESET TOURS

OFF

PRIVACY

OFF

EXIT

PATTERN TOURS

OFF

POT TEST

OFF

PRESETS

OFF

Menu Item

Description

MIC SETUPS

See

Section 5.1 MIC Setups Menu, page 24

ACTIVATE FEATURE

See

Section 5.2 Activate Feature Menu, page 26

PRESET TOURS

See

Section 5.3 Preset Tour Menu, page 26

PATTERN TOURS

See

Section 5.4 Pattern Tour Menu, page 28

PRESETS

See

Section 5.5 Presets Menu, page 29

COMMUNICATIONS

See

Section 5.6 Communications Menu, page 30

ADVANCED SETUPS

See

Section 5.7 Advanced Setups Menu, page 31

ALARMS

See

Section 5.8 Alarms Menu, page 34

SONY SET

See

Section 5.9 Sony Set Menu, page 35

CAPTIONS

See

Section 5.10 Captions Menu, page 42

PRIVACY

See

Section 5.11 Privacy Menu, page 45

POT TEST

See

Section 5.12 Pot Test Menu, page 46

Summary of Contents for MIC Series 500

























































Search results

Summary of Contents for MIC Series 500

Reviews:

Related manuals for MIC Series 500

Brands by name

Popular brands

Bosch MIC Series 500, User Manual

Search results

Summary of Contents for MIC Series 500

Reviews:

Related manuals for MIC Series 500

Brands by name

Popular brands